CE  RoHs  SAA  GS  UL/CUL: E357448

2. LED chip uses eutectic welding procedure technology.

3. LED chip uses heat and electric separation technology.

4. Heat-column radiator principle is liquid evaporating, condensing and then heat dissipation.

5. P-N temperature is controlled less than 85 centigrade.

6. Input voltage: 90-305V, output voltage:  28-36V safe voltage.

150W LED High Bay Light Specification

1.     Electricity Parameters:

2.     Optical Parameters:

3.     Physical Parameters:

4.     Packing:

5. Attention：

5.1. It is forbidden to squeeze the top of the lamp, so as not to damage the lamp shade.

5.2. Yellow green line to protect the earth, the rest two for ac input power cord.

5.3. When installation, hanging ring must be tight, in case lead to the lamp body fall off

5.4. Because this product uses the heat pipe thermal conductivity, so it is strictly prohibited collision fall

5.5.  When installing a lampshade, hang up the screws on the composite aluminum plate suspended within 2-3 mm

5.6.  Install the lamp shade on the aluminum plate, screw corresponding with hole , then clockwise rotating lamp shade, Let the nut into the chimney hole and lock it

5.7. LED high bay use heat pipe technology , lamp must be hang perpendicular to the ground, deflection Angle is not greater than 15 degrees. the wire rope on heat sink is used to protect lamp body, to prevent fall off. The rope must be connected to the fixed building can bearing, to avoid lamp body fall off lead to goods damaged or personnel injury

 

Factory, Warehouse, Supermarket, Station, Stadium, dock