50W UL CUL E357448 - SHENZHEN LUMSUN LIGHTING CO.,LTD

CE RoHs SAA GS UL/CUL: E357448

1. CREE LED: XM-L or XP-G series.

2. LED chip uses eutectic welding procedure technology.

3. LED chip uses heat and electric separation technology.

4. Heat-column radiator principle is liquid evaporating, condensing and then heat dissipation.

5. P-N temperature is controlled less than 85 centigrade.

6. Input voltage: 90-305V, output voltage: 28-36V safe voltage.

50W LED High Bay Light Specification

1. Electricity Parameters:

Code	Items	Parameters
1	Input voltage	85-265VAC 47-63Hz
2	Input Current	0.25A(230V)
3	Power	50W
4	Output voltage	30V
5	Output current	1.5A
6	Power Factor	>0.85
7	Luminous Efficiency	≥90%

2. Optical Parameters：

Code	Items	Parameters
1	50% Beam angel（H,V）	70°
2	Peak intensity	1097cd
3	Luminous Flux	4500lm
4	Color Rendering Index	≥75Ra
5	Color Temperature	2800-3200K/5500-6000K

3. Physical Parameters:

Code	Items	Parameters
1	working temperature	-40°- 60°
2	Ip	IP65
3	N.W	4.2Kg
4	Length	φ280mm
5	Width	φ280mm
6	Height	450mm

4. Packing:

No	part	name	parameters
1	heat sink box	OD	230230315
1	heat sink box	G.W	4.5Kg
2	Lamp reflector box（1/25）	OD	300300300
2	Lamp reflector box（1/25）	G.W	15Kg

5. Attention：

5.1. It is forbidden to squeeze the top of the lamp, so as not to damage the lamp shade.

5.2. Yellow green line to protect the earth, the rest two for ac input power cord.

5.3. When installation, hanging ring must be tight, in case lead to the lamp body fall off

5.4. Because this product uses the heat pipe thermal conductivity, so it is strictly prohibited collision fall

5.5. When installing a lampshade, hang up the screws on the composite aluminum plate suspended within 2-3 mm

5.6. Install the lamp shade on the aluminum plate, screw corresponding with hole , then clockwise rotating lamp shade, Let the nut into the chimney hole and lock it

Factory, Warehouse, Supermarket, Station, Stadium, dock

LED High bay light